Motion sensor headlamp cob and smd led high lumens headlamp type-c rechargeable Ipx4 waterproof headlight with usb cable

Model
GS-6049
Material
ABS
Battery
Built-in 1*18650/1200mAh Li-battery
Mode
COB strong-low-flash-3SMD red light-flash
White  box
9.8*5*8.3cm
Carton box
41*27*43.5cm, 100pcs
N.W.
14kg
G.W.
14.5kg
Edit Content

LET's Brighten The World Together!

Have a question or need a custom solution? Fill out the form, and we’ll respond quickly to assist you.

Product Content

Model
GS-6049
Material
ABS
Battery
Built-in 1*18650/1200mAh Li-battery
Mode
COB strong-low-flash-3SMD red light-flash
White  box
9.8*5*8.3cm
Carton box
41*27*43.5cm, 100pcs
N.W.
14kg
G.W.
14.5kg
Instructions for using lithium battery

1. The charging method of lithium batteries is completely different from that of mobile phone batteries; Lithium batteries have no memory and can be charged at any time, but do not overcharge or discharge them.

2. According to the green light on the charger, it can be unplugged and cannot be overcharged. When the light dims to a low level, please charge the battery in a timely manner, otherwise excessive discharge of the battery can easily cause battery leakage, inability to charge, and other phenomena.

3. Special reminder: Use a “three proof” charger with anti overcharging, anti reverse connection, and anti short circuit protection.

4. If the battery is not used for a long time, it should be fully charged before storage. Normally, it should be charged and discharged again after about three months.

Instructions for using flashlight

1. Do not use over voltage. The voltage should not exceed 4.5V. The positive and negative poles of the battery should not be reversed, otherwise the circuit board may be burned. Pay attention to controlling the temperature changes of the flashlight, and non professionals should not open the circuit board.

2. When using a flashlight, choose according to the voltage and battery requirements of the flashlight. Do not use it indiscriminately to prevent burning the circuit board. Do not use batteries of different models and voltages at the same time.

3. In use, when the brightness of the flashlight changes significantly, it should be turned off to prevent excessive battery discharge. If it is a dry battery, it needs to be replaced with a new battery of the same type. If it is a lithium battery, it needs to be charged in a timely manner.

4. It is strictly prohibited to be exposed to sunlight. An excessively high temperature environment can increase the internal pressure of the battery and force the battery pressure limiting valve to automatically open. The direct consequence is to increase the water loss of the battery. Excessive water loss of the battery will inevitably cause a decrease in battery activity, accelerate the softening of the electrode plate, and cause fatal damage such as heating, bulging, deformation, etc. outside the shell during charging.
5. Ensure that the battery is installed in the correct direction into the flashlight to avoid mixing old and new battery with battery of different brands.

6. Do not direct the light of the flashlight directly into people’s eyes, as it is extremely bright and dazzling, to avoid affecting vision, especially in children.

7. Pay attention to the waterproof, moisture-proof, and anti drop measures of the flashlight.

.
Was established in 2006. Around 4,000©O factory.
Specialized in designing, developing, manufacturing the led flashlight, headlight, camping light, working light, bike light, pen light, UV flashlight, keychain light over 14 years.Have more than 800 types of models.
Have a completed quality control standard. (From sourcing raw materials to packing mass products, we strictly control the quality on 8 parts to make sure that the customers will receive the satisfied products.)Have CE certification, RoHS, NOM, FCC, and BSCI.
Both of OEM and ODM service are available for US.
Efficient and warm sales service with excellent quality.

LET's Brighten The World Together!

Have a question or need a custom solution? Fill out the form, and we’ll respond quickly to assist you. 

Related Products

FAQ

Are you a trading company or manufacturer?

We are a professional manufacturer of led flashlight, led headlamp, and other lightingproducts since 2006.

Which payment method you accept?

T/T,Bank wire,West Union, Trade Assurance all available.

What’s the lead time if we place order?

Depended on different models and package. Usually 30days after confirming all detailsand received advance payment.

Can l make our logo/barcode/company name/series numbers on your products?

Yes, of course. Please inform us before our production, and confirm the desian firstlybase on our sample.

Can l get an sample to check quality before mass order?

Yes, you can. Normal sample will be send within 5 days. Customized sample take5-7days. Kindly contact us to asking more details of sample.

How do you control the products quality?

We have a completed quality control standard. (From sourcing raw materials topacking mass products, we strictly control the quality on 8 part to make sure that thecustomers will receive the satisfied products.

Get the latest catalog of 2025!

After you complete the form, you will get the latest product catalogue of 2025 immediately!